| About |
|---|
| Our TPU “Mirakutoran ®” has the following outstanding features. Has excellent wear resistance Tensile strength, high mechanical strength and tear strength Is a wide range of hardness High impact strength Oil resistance and good chemical resistance Excellent low temperature properties, weather resistance, ozone resistance and is also good Flexible rubber elastic, vibration-effective silencing Compared to other urethane elastomer thermoplastic that is more Playback can be processed Vulcanization process without curing reaction, very high productivity Resins and other polymer is easy Solution is easily dissolved in solvent process Mirakutoran to the standard type E and P are two types. Type E has a certain cross-linked structure in the molecule, and excellent mechanical strength and compression set. P type is characterized by good liquidity linear structure&& |
| Product Description | |
|---|---|
| Supplier | Mirakutoran |
| Generic | 其他TPU合金 |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Weather resistance is good,Good flexibility,High impact resistance,Antifreeze,noise reduction,Good tear strength,Good wear resistance,Grease resistance,Ozone resistance,Solvent resistance |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.23 | g/cm³ | ASTM D792 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, 23 ℃, 2 mm | 49.0 | MPa | ASTM D412 |
| 100% strain, 23 ℃, 2 mm | 9.00 | MPa | ASTM D412 |
| Tensile strain | |||
| Fracture, 23 ℃, 2 mm | 520 | % | ASTM D412 |
| tear strength | |||
| 23℃，2.00 mm | 103 | kN/m | ASTM D624 |
| Compression deformation | |||
| 70℃，22 hr | 37 | % | ASTM D395 |
| Resilience | |||
| 23℃，2.00 mm | 35 | % |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | -41.0 | ℃ | DSC |
| Vicat Softening Temp | 115 | ℃ | ASTM D1525 3 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shore A, 23 ℃, 2.00 mm, injection molding | 93 to 97 | ASTM D2240 | |
| Shore D, 23 ℃, 2.00 mm, injection molding | 46 | ASTM D2240 | |
| Taber abraser | |||
| 23 ℃, 1000 cycles, 1000 g, H-22 wheel | 52.0 | mg | ASTM D1044 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 12 in/min |
| 3. Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |