| About |
|---|
| PVC COMPOUND RECOMMENDED FOR EXTRUSION PROFILE FOR GENERAL USE.&& |
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Negative |
| Availabilitys | Latin America |
| Process Methods | Profile extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.34 to 1.40 | g/cm³ | ASTM D792 |
| Color a | -2.34 to -0.340 | ME 12 | |
| Color b | -2.76 to -0.760 | ME 12 | |
| Color L | 92.1 to 94.1 | ME 12 | |
| colour | OK | ME 12 | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore D, 15 seconds | 78 to 82 | ASTM D2240 | |
| tensile strength | > 39.2 | MPa | ASTM D638 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |