| About |
|---|
| CONAP AD-6404 is a two-component, unfilled, low viscosity polyurethane resin system designed for use in biomedical applications.&& |
| Product Description | |
|---|---|
| Supplier | Cytec Industries |
| Generic | PUR |
| Material Status | Commercial: Negative |
| Features | Low Viscosity |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | |||
| — | 0.970 | g/cm³ | |
| — | 1.14 | g/cm³ | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 60 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 23.7 | MPa | |
| Tensile strain | |||
| fracture | 130 | % | |
| tear strength | 71.6 | kN/m |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermosetting components | |||
| resin | 按重量计算的混合比: 100 | ||
| Hardening method | 按重量计算的混合比: 100 |
| Thermosetting mixed viscosity | Nominal value | Unit | Test method |
|---|---|---|---|
| 25℃ | 850 | cP | |
| 50℃ | 280 | cP |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Hardener |
| 3. Resin |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |