Braskem PE ML3600S

About
The resin ML3600S is a Linear Low Density Polyethylene developed for rotomolding. Applications: Water tanks General purpose parts Technical Characteristics: High stiffness Excellent environmental stress cracking resistance (ESCR) UV and heat stabilization Additives: Weathering resistance UV8 and antioxidants&&

Product Description
Supplier	Braskem
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Weather resistance is good,Inoxidizability,Low density,Copolymer,Hexene copolymers,High ESCR
Availabilitys	Latin America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.933	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	4.7	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)			ASTM D1693
50 ℃, 2.00 mm, 10% non-ionic surfactant, molded, F50	250	hr
50 ℃, 2.00 mm, 100% non-ionic surfactant, molded, F50	> 1000	hr

MECHANICAL	Nominal value	Unit	Test method
tensile strength			ASTM D638
Yield, molding	19.0	MPa
Fracture, molded	29.0	MPa
Tensile strain			ASTM D638
Yield, molding	14	%
Fracture, molded	> 1000	%
Bending modulus
1% cut, molded	770	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Izod notched impact strength			ARM
-40 ℃, 3.2mm, roll forming	55	J
-40 ℃, 6.4mm, roll forming	115	J

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature			ASTM D648
0.45 MPa, unannealed, molded	60.0	℃
1.8 MPa, unannealed, molded	42.0	℃
Melting peak temperature	127	℃	ASTM D3418

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.