Moplen EP380T - SOLIAO

About
Moplen EP380T Moplen EP380T is polypropylene impact copolymer. With its high flow , excellent dimensional stability, and superior balance of stiffness and impact, this grades is especially suitable for injection molding. Potential end use applications include washing machine tubs, other electrical appliance parts, automotive parts, food packaging and housewares.&&Moplen EP380T Features: Superior balance of properties Good low-temperature impact resistance Excellent dimensional stability Resist dust and dirt pick-up Applications: Washing machine tub Electrical appliances Automotives Food packaging Housewares&&

About

Moplen EP380T Moplen EP380T is polypropylene impact copolymer. With its high flow , excellent dimensional stability, and superior balance of stiffness and impact, this grades is especially suitable for injection molding. Potential end use applications include washing machine tubs, other electrical appliance parts, automotive parts, food packaging and housewares.&&Moplen EP380T Features: Superior balance of properties Good low-temperature impact resistance Excellent dimensional stability Resist dust and dirt pick-up Applications: Washing machine tub Electrical appliances Automotives Food packaging Housewares&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Dimensional Stability,High liquidity,Food contact compliance,low-temperature impact resistance,Impact copolymer
Availabilitys	Africa & Middle East ,Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	44	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	24.0	MPa	ASTM D638
Tensile strain
yield	6.0	%	ASTM D638
Bending modulus	1150	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	62	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	90.0	℃	ASTM D648

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.