KRATON® D1161 J

About
Kraton D1161 J is a clear linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied from Japan in the physical form(s) identified below in the grade nomenclature. Kraton D1161 JSP – supplied as dusted dense pellets Kraton D1161 JS – supplied as dusted crumb Kraton D1161 JU – supplied as undusted crumb Kraton D1161 J is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.&&

About

Kraton D1161 J is a clear linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied from Japan in the physical form(s) identified below in the grade nomenclature. Kraton D1161 JSP – supplied as dusted dense pellets Kraton D1161 JS – supplied as dusted crumb Kraton D1161 JU – supplied as undusted crumb Kraton D1161 J is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.&&

Product Description
Generic	SIS
Material Status	Commercial: Active
Features	Block Copolymer,Inoxidizability
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.920	g/cm³
Melt Flow Rate
190℃，2.16kg	1.3 to 3.7	g/10min	ISO 1133
Combined with styrene	15.0	%
Ash Content			ISO 247
JS	< 2.5	%	ISO 247
JSP	< 1.0	%	ISO 247
JU	< 1.0	%	ISO 247
Volatiles
2hr，110℃	< 1.0	%	Internal Method
Solution viscosity
25wt% toluene, 25 ℃	0.90 to 1.7	Pa·s	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore A, 30 seconds	37		ISO 7619

elastic body	Nominal value	Unit	Test method
tensile strength
yield	28.0	MPa	ISO 37
300% strain	0.900	MPa	ISO 37
Tensile strain
fracture	1300	%	ISO 37

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.