Prime Tuff-X FR

About
Prime Tuff-X FR is our Prime Tuff-X with a flame retardant characteristic. It has a higher flexural modulus than Prime Tuff-X and a flammability V1 in accordance with UL Standard 94. Applications: Tuff-X FR has very good chemical resistance, can be used in interior or exterior applications where UV protection is called for and has excellent stiffness and durability. Typical applications for this product include battery covers and side panels on lift trucks, tow motors and construction equipment. Processing: The same processing equipment, tooling and operating parameters used to for our Prime Tuff-X material may also be used for this product. Finishing: Prime Tuff-X FR can be fabricated and bonded using the same techniques that are used for our Prime Tuff-X. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: Prime Tuff-X FR can be color matched or even painted with a two part paint system. Tuff-X FR is available in gauges from .090 to .400 and up to 120″ wide. Textures include Calf Grain, FL/HC, H/C,Smooth, Levant ll and Diamond Plate.&&

About

Prime Tuff-X FR is our Prime Tuff-X with a flame retardant characteristic. It has a higher flexural modulus than Prime Tuff-X and a flammability V1 in accordance with UL Standard 94. Applications: Tuff-X FR has very good chemical resistance, can be used in interior or exterior applications where UV protection is called for and has excellent stiffness and durability. Typical applications for this product include battery covers and side panels on lift trucks, tow motors and construction equipment. Processing: The same processing equipment, tooling and operating parameters used to for our Prime Tuff-X material may also be used for this product. Finishing: Prime Tuff-X FR can be fabricated and bonded using the same techniques that are used for our Prime Tuff-X. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: Prime Tuff-X FR can be color matched or even painted with a two part paint system. Tuff-X FR is available in gauges from .090 to .400 and up to 120″ wide. Textures include Calf Grain, FL/HC, H/C,Smooth, Levant ll and Diamond Plate.&&

Product Description
Generic	3D打印材料
Material Status	Commercial: Active
Features	Good Rigidity,Weather resistance is good,High impact resistance,Flame Characteristics,High Heat Resistance,Good Tensile Strength,Durability,Solvent resistance,low-temperature impact resistance,Agglomerability,V-1
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.18	g/cm³	ASTM D792
Melt Flow Rate	1.0	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	20.7	MPa	ASTM D638
Tensile strain			ASTM D638
yield	13	%	ASTM D638
fracture	230	%	ASTM D638
Bending modulus	2280	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Drop hammer impact			ASTM D5420
-30℃	33.4	J	ASTM D5420
23℃	> 36.2	J	ASTM D5420

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
3.00 mm	V-1		UL 94

Notes
1. Typical properties: these are not to be construed as specifications.
2. >0.118 in
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.