Rulon® J

About
Rulon® J is an all-polymeric reinforced, light brown colored PTFE compound that operates exceptionally well against soft mating surfaces such as 316 stainless steel, aluminum, mild steel, brass and other plastics. The unique “shaft friendly” material is also low in friction and wear and is self lubricating. Rulon J has one of the lowest coefficients of friction of most reinforced PTFE materials. This makes it ideally suited for start/stop applications where stick-slip must be eliminated. The tribological properties of this material also make it suitable for both bearing and wear component applications.&&

Product Description
SupplierSaint Gobain
GenericPTFE
Material StatusCommercial: Active
FeaturesLow coefficient of friction,Self-lubricating,High Heat Resistance,Good wear resistance
AvailabilitysAfrica & Middle East ,North America,Asia Pacific,Europe

Technical Data
PHYSICALNominal valueUnitTest method
Density1.95g/cm³ASTM D792

MECHANICALNominal valueUnitTest method
tensile strength13.8MPaASTM D1708
Tensile strain
fracture180%ASTM D1708

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.