Baoding 67I90 - SOLIAO

About
Processing: Injection molding Properties: Shorter molding time, Good flexibility, Good hand feeling, Excellent Physical performance. Application: Electronics coating, Key, Wire plug, Shoe, Hand Grip, Pedometer, Watch band, Air bag, Water balls, Electronics cover, Auto part, Dustproof cover, Garment accessories, Animal tag, Sealing gasket, Machine part, Composite modified, Roller, Sports equipment part etc.&&

About

Processing: Injection molding Properties: Shorter molding time, Good flexibility, Good hand feeling, Excellent Physical performance. Application: Electronics coating, Key, Wire plug, Shoe, Hand Grip, Pedometer, Watch band, Air bag, Water balls, Electronics cover, Auto part, Dustproof cover, Garment accessories, Animal tag, Sealing gasket, Machine part, Composite modified, Roller, Sports equipment part etc.&&

Product Description
Supplier	Bangtai
Generic	TPU-酯
Material Status	Commercial: Active
Features	Good flexibility
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.18 to 1.22	g/cm³	JIS K7311

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	88 to 92		JIS K7311

elastic body	Nominal value	Unit	Test method
tensile strength			JIS K7311
100% strain	9.81	MPa	JIS K7311
300% strain	23.5	MPa	JIS K7311
tensile strength	37.3	MPa	JIS K7311
Tensile strain
fracture	450	%	JIS K7311
tear strength	120	kN/m	JIS K7311

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	100	°C
Drying time	3.0 to 5.0	hr
Processing (melt) temperature	170 to 200	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.