Eporex® HIPS 855FR

About
Eporex® HIPS 855FR is a High Impact Polystyrene material. It is available in North America for injection molding. Important attributes of Eporex® HIPS 855FR are: Flame Rated Flame Retardant High Gloss Impact Resistant Typical application of Eporex® HIPS 855FR: Electrical/Electronic Applications&&

Product Description
Generic	PS (HIPS)
Material Status	Commercial: Active
Features	Good surface appearance,High impact resistance,Good liquidity,Flame Characteristics,V-0
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.15	g/cm³	ASTM D792
Melt Flow Rate
200℃，5.0kg	10	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
3.2mm	86	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	72.2	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	V-0		UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
M-level	65		ASTM D785
tensile strength
yield	22.6	MPa	ASTM D638
Tensile strain
yield	50	%	ASTM D638
Bending modulus	2470	MPa	ASTM D790
bending strength
yield	35.3	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.