Cereplast Hybrid Resins® 103

About
Cereplast Hybrid Resins® are bio-based compounds containing a significant amount of renewable, ecologically sound sources such as starches from corn, tapioca, wheat and potatoes. Combined with a lower petroleum-based plastic content and renewable resources content, Cereplast Hybrid Resins® offer a significant carbon footprint reduction in the final product. Hybrid 103 is based on a high quality Polypropylene compounded on state-of-the-art mixing equipments using a proprietary formulation. Hybrid 103 offers a unique combination of mechanical properties, ease of processing, high aesthetic surface. Hybrid 103 has been designed to have an excellent balance between impact strength, rigidity and processability. Hybrid 103 can be processed on existing conventional electric and hydraulic reciprocating screw injection molding machines. Please see our processing guide for guidelines.&&

About

Cereplast Hybrid Resins® are bio-based compounds containing a significant amount of renewable, ecologically sound sources such as starches from corn, tapioca, wheat and potatoes. Combined with a lower petroleum-based plastic content and renewable resources content, Cereplast Hybrid Resins® offer a significant carbon footprint reduction in the final product. Hybrid 103 is based on a high quality Polypropylene compounded on state-of-the-art mixing equipments using a proprietary formulation. Hybrid 103 offers a unique combination of mechanical properties, ease of processing, high aesthetic surface. Hybrid 103 has been designed to have an excellent balance between impact strength, rigidity and processability. Hybrid 103 can be processed on existing conventional electric and hydraulic reciprocating screw injection molding machines. Please see our processing guide for guidelines.&&

Product Description
Generic	PP Alloy
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Good surface appearance,High impact resistance,High liquidity,Renewable resources
Availabilitys	North America,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.05	g/cm³	ASTM D792-A
Melt Flow Rate
190℃，2.16kg	24	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	1070	MPa	ASTM D638
tensile strength
fracture	17.4	MPa	ASTM D638
Tensile strain
fracture	10	%	ASTM D638
Bending modulus	758	MPa	ASTM D790
bending strength	22.1	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	64	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	74.0	℃	ASTM D648

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.