| About |
|---|
| EVALENE ® HJ04602 is a narrow molecular weight distribution resin intended to deliver robust performance for applications requiring toughness, balanced mechanical properties and good processability. EVALENE ® HJ04602 is designed to meet the rigorous processing requirements of high-speed injection and compression molding equipment, offering opportunities to achieve better economics without compromising performance. FEATURES Medium Flow Excellent Izod impact Strength High environmental stress crack resistance (ESCR) Outstanding organoleptics* Meets Philippine FDA food contact requirements Halal-certified TYPICAL APPLICATIONS Beverage caps for mineral water, juice and tea drinks&& |
| Product Description | |
|---|---|
| Generic | HDPE |
| Material Status | Commercial: Negative |
| Features | Excellent Processability,Good flexibility,High impact resistance,Food contact compliance,Good sensory characteristics.,Weight distribution,Moderate liquidity,High density,High ESCR |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.960 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 4.0 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD：48 hrs | 1.2 to 1.6 | % | Internal Method |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 10% non-ionic detergent, F50 | 4.00 | hr | ASTM D1693B |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 180 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 78.0 | ℃ | ASTM D648 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Compression molding temperature | 150 to 190 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 62 | ASTM D2240 | |
| Tensile modulus | |||
| 1% secant | 1370 | MPa | ASTM D638 |
| tensile strength | ASTM D638 | ||
| yield | 26.0 | MPa | ASTM D638 |
| fracture | 11.0 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| yield | 17 | % | ASTM D638 |
| fracture | 1200 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | 780 | MPa | ASTM D790-A |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 180 to 220 | °C | |
| Mold temperature | 20 to 40 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 23°C |
| 3. 0.20 in/min |
| 4. 2.0 in/min |
| 5. 0.051 in/min |
| 6. Partial Break |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |