Pinnacle PP 2135H

About
35 MELT FLOW MEDIUM IMPACT COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 2135H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency. This product is intended for packaging, housewares and consumer products applications. The 2135H product provides: High stiffness and impact strength High melt flow Excellent mold release Superior processability Excellent lot-to-lot consistency UL Listed Pinnacle’s 2135H polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).&&

About

35 MELT FLOW MEDIUM IMPACT COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 2135H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency. This product is intended for packaging, housewares and consumer products applications. The 2135H product provides: High stiffness and impact strength High melt flow Excellent mold release Superior processability Excellent lot-to-lot consistency UL Listed Pinnacle’s 2135H polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Weather resistance is good,Good surface appearance
Availabilitys	North America,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	35	g/10min	ASTM D1238
Shrinkage rate
MD	1.4	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength
Yield, 3.20 mm, injection molding	22.8	MPa	ASTM D638
Tensile strain
Yield, 3.20 mm, injection molding	6.0	%	ASTM D638
Bending modulus
1% cut, 3.20 mm, injection molded	1170	MPa	ASTM D790-A

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23 ℃, 3.2mm, injection molding	> 18.3	kJ/m²	ASTM D256
23 ℃, 3.2mm, injection molding	> 190	J/m	ASTM D256
Drop hammer impact
-30℃	22.0	J	ASTM D5420

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	103	℃	ASTM D648

Notes
1. Typical properties: these are not to be construed as specifications.
2. Type I, 2.0 in/min
3. Type I, 0.050 in/min
4. Type I
5. Method G, Geometry GC
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.