LUVOCOM® 1-1111 VP

About
LUVOCOM® 1-1111 VP is a Polyamide 66 (Nylon 66) material filled with carbon fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of LUVOCOM® 1-1111 VP are: Conductive ESD Protection Good Stiffness Heat Stabilizer High Dimensional Stability Typical applications include: Engineering/Industrial Parts Automotive Business/Office Goods Construction Applications Fabrics/Fibers&&

About

LUVOCOM® 1-1111 VP is a Polyamide 66 (Nylon 66) material filled with carbon fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of LUVOCOM® 1-1111 VP are: Conductive ESD Protection Good Stiffness Heat Stabilizer High Dimensional Stability Typical applications include: Engineering/Industrial Parts Automotive Business/Office Goods Construction Applications Fabrics/Fibers&&

Product Description
Supplier	Lehmann
Generic	PA66
Material Status	Commercial: Active
Features	Good Rigidity,Low warping,Good Dimensional Stability,Conductive,Low coefficient of friction,Lubricating,Good wear resistance,Heat Stabilized
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.26	g/cm³	ISO 1183
Shrinkage rate
MD	0.2	%	ISO 294-4
TD	0.5	%	ISO 294-4
Water absorption rate
23℃，24hr	<=1.0	%	ISO 62

MECHANICAL	Nominal value	Unit	Test method
tensile strength
23℃	190	MPa	ISO 527-2
Tensile strain
Fracture, 23 ℃	3.0	%	ISO 527-2
bending strength
4% strain, 23 ℃	285	MPa	ISO 178
Bending modulus
23℃	10000	MPa	ISO 178

THERMAL	Nominal value	Unit	Test method
Thermal conductivity coefficient	0.430	W/m/K	DIN 52612
Linear coefficient of thermal expansion
MD	1.8E-5	1/℃	ISO 11359-2
Maximum operating temperature	120	℃
Maximum operating temperature	160	℃

Electrical performance	Nominal value	Unit
Dissipation factor
Volumetric resistance	1.0E+5	Ω.cm
Surface resistance	1000	Ω.cm

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength
23℃	33	kJ/m²	ISO 179/1eU
Charpy Notched Impact Strength	11	kJ/m²	ISO 179-1eA

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	75 -105	°C
Drying time	4-16	Hr
Injection temperature
Rear barrel temperature	290-310	°C
Central temperature of the barrel	290-310	°C
Barrel front temperature	290-310	°C
Die temperature	280-300	°C
Mold temperature	90-120	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.