| About |
|---|
| CERTENE™ HPB-0760 HPB-0760 is a certified prime Phillips Process designed for BLOW MOLDING of containers for packaging of non-aggressive chemicals. HPB-0760 features low to medium swell, easy processability in conventional continuous extrusion equipment, good ESCR, good Impact strength, high Stiffness, improved Barrier, and low Odor and Taste. HPB-0760 applications include small to medium size thin wall bottle for milk, water and juices, wide mouth containers for body powders, and extrusion of sheet and profiles. HPB-0760 processing temperature is 140 to 165°C., with mold 10 to 30°C. HPB-0760 complies with FDA regulation 21CFR 177.1520 (c) 3.1(a) + 3.2(a) and with most international regulations concerning the use of Polyethylene in contact with food articles.&&CERTENE™ HPB-0760 HPB-0760 is a certified prime Phillips Process designed for BLOW MOLDING of containers for packaging of non-aggressive chemicals. HPB-0760 features low to medium swell, easy processability in conventional continuous extrusion equipment, good ESCR, good Impact strength, high Stiffness, improved Barrier, and low Odor and Taste. HPB-0760 applications include small to medium size thin wall bottle for milk, water and juices, wide mouth containers for body powders, and extrusion of sheet and profiles. HPB-0760 processing temperature is 140 to 165°C., with mold 10 to 30°C. HPB-0760 complies with FDA regulation 21CFR 177.1520 (c) 3.1(a) + 3.2(a) and with most international regulations concerning the use of Polyethylene in contact with food articles.&& |
| Product Description | |
|---|---|
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,High impact resistance,Low odor,High density,Block resin,High ESCR |
| Availabilitys | North America,Latin America |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.960 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.70 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 50 ℃, 1.75 mm, 100% non-ionic surfactant, molded, F50 | 15.0 | hr | ASTM D1693B |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, molding | 31.0 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, molded | 710 | % | ASTM D638 |
| Bending modulus | |||
| 1% cut, molded | 1450 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile impact strength | |||
| Compression Molding | 189 | kJ/m² | ASTM D1822 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 80.0 | ℃ | ASTM D648 |
| Embrittlement temperature | < -75.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 128 | ℃ | ASTM D1525 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Mold temperature | 10 to 30 | °C | |
| Melt temperature | 140 to 165 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Notched bent strip |
| 3. 2.0 in/min |
| 4. 0.051 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |