| About |
|---|
| It has a good resistance to heat,a high resistance to impact,a high strength and a good comprehensive performace.It is suitable for making a superior quality automobile parts with a good surface gloss.It sults to make an external part with a good processing performance. Automobile industry:It is used for the fender-guard,the reference mirror body,the water tank front head and the resist heat,resist impact and high-strength parts; Household appliance industry;It is used for the warm-air drier body,the mobile phone body,etc.&& |
| Product Description | |
|---|---|
| Supplier | Dongchen |
| Generic | PP+PE |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 0.80 to 2.0 | g/10min | |
| Shrinkage rate | 1.3 to 1.7 | % | |
| humidity | < 0.10 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | > 28.0 | MPa | |
| Tensile strain | |||
| fracture | > 300 | % | |
| bending strength | > 22.0 | MPa |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | > 65 | kJ/m² | |
| Notched impact strength of cantilever beam | 无断裂 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. V100 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |