| About |
|---|
| DuPont™ Surlyn® 9950 is an ionomer of ethylene acid copolymer. This polymeric material can be processed in conventional extrusion and injection equipment designed to process polyethylene and ethylene copolymer type resins, to create various shapes and sheeting.&& |
| Product Description | |
|---|---|
| Supplier | DOW |
| Generic | EMA |
| Material Status | Commercial: Active |
| Features | Copolymer |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.96 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 5.00 | g/10min | ASTM D1238 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Mistiness 6350 μ M | 18 | % | ASTM D1003 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 87 | ℃ | ASTM D4591 |
| Vicat Softening Temp | |||
| 79 | ℃ | ASTM D1525 | |
| Embrittlement temperature | -100 | ℃ | ASTM D746 |
| Linear coefficient of thermal expansion | |||
| MD | 1.5E-4 | 1/℃ | ASTM D696 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 62 | ASTM D2240 | |
| tensile strength | |||
| 23℃ | 28.30 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 23 ℃ | 490 | % | ASTM D638 |
| Bending modulus | |||
| 23℃ | 250 | MPa | ASTM D790 |
| Friction coefficient | |||
| abrasion resistance | 130 | mm³ |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type IV, 2.0 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |