| About |
|---|
| Sarlink® TPV X6100 series are engineered materials designed for consumer, automotive, and industrial applications requiring superior colorability and elastic performance. Sarlink® TPV X6145N is a medium hardness, low density, multi-purpose thermoplastic vulcanizate that does not require pre-drying and can be processed by injection molding.&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPV |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good flexibility,Good liquidity,Good bond,Elastic,Low density,Solvent resistance,Good coloring |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.888 | g/cm³ | ASTM D792 |
| Density | 0.890 | g/cm³ | ISO 1183 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D412 | ||
| TD, 100% strain | 1.10 | MPa | ASTM D412 |
| MD, 100% strain | 1.60 | MPa | ASTM D412 |
| tensile strength | ISO 37 | ||
| TD, 100% strain | 1.10 | MPa | ISO 37 |
| MD, 100% strain | 1.60 | MPa | ISO 37 |
| tensile strength | ASTM D412 | ||
| fracture | 3.70 | MPa | ASTM D412 |
| MD, fracture | 3.10 | MPa | ASTM D412 |
| tensile strength | ISO 37 | ||
| fracture | 3.70 | MPa | ISO 37 |
| MD, fracture | 3.10 | MPa | ISO 37 |
| Tensile strain | ASTM D412 | ||
| fracture | 610 | % | ASTM D412 |
| Flow rate, fracture | 400 | % | ASTM D412 |
| Tensile strain | ISO 37 | ||
| fracture | 610 | % | ISO 37 |
| Flow rate, fracture | 400 | % | ISO 37 |
| tear strength | 16 | kN/m | ISO 34-1 |
| TD | 15.8 | kN/m | ASTM D624 |
| Compression deformation | ASTM D395 | ||
| 23℃，22 hr | 24 | % | ASTM D395 |
| 70℃，22 hr | 33 | % | ASTM D395 |
| 125℃，70 hr | 49 | % | ASTM D395 |
| Compression deformation | ISO 815 | ||
| 23℃，22 hr | 24 | % | ISO 815 |
| 70℃，22 hr | 33 | % | ISO 815 |
| 125℃，70 hr | 49 | % | ISO 815 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ISO 868 | ||
| Shore A, 5 seconds, extrusion molding | 42 | ISO 868 | |
| Shore A, 5 seconds, injection molding | 46 | ISO 868 | |
| Shore hardness | ASTM D2240 | ||
| Shore A, 5 seconds, extrusion molding | 42 | ASTM D2240 | |
| Shore A, 5 seconds, injection molding | 46 | ASTM D2240 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Apparent viscosity of melt – Capillary @ 206/s | |||
| 200℃ | 225 | Pa·s | ISO 11443 |
| 200℃ | 225 | Pa·s | ASTM D3835 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Method Ba, Angle (Unnicked) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |