| About |
|---|
| FRAGOM PR PR/900 ELAS is a flame retardant halogen free polyolefin thermoplastic compound. FRAGOM PR PR/900 ELAS is a flexible flame retardant polyolefin thermoplastic compound having high temperature index and good oxygen index, suitable for cable sheathing. Study to Crosslinking by radiations, to pass 30,000 cycles and Sadomaso test.&& |
| Product Description | |
|---|---|
| Generic | 聚烯烃，共挤薄膜用聚烯烃 |
| Material Status | Commercial: Active |
| Features | Halogen free,Flame Characteristics,High Heat Resistance |
| Availabilitys | Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.53 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，21.6kg | 3.0 | g/10min | ASTM D1238 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| The rate of change in tensile strength in air | |||
| 120℃，168 hr | 5.0 | % | IEC 60811 |
| Changes in tensile stress during fracture in air | |||
| 120℃，168 hr | -11 | % | IEC 60811 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Conductivity | < 8.00 | µS/mm | IEC 60754-2 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Extreme oxygen index | 35 | % | ASTM D2863 |
| Halogen Content | 0 | % | IEC 60754-1 |
| Temperature index | |||
| burning | 320 | ℃ | NES 715 |
| Corrosive gases in flue gas | |||
| pH | > 4.50 | IEC 60754-2 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 41 | ASTM D2240 | |
| tensile strength | |||
| yield | 9.00 | MPa | IEC 60811 |
| Tensile strain | |||
| fracture | 200 | % | IEC 60811 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 60 to 70 | °C | |
| Drying time | 2.0 to 3.0 | hr | |
| Barrel 1 zone temperature | 120 | °C | |
| Barrel 2 zone temperature | 135 | °C | |
| Barrel 3 zone temperature | 145 | °C | |
| Barrel 4 zone temperature | 160 | °C | |
| Barrel 5 zone temperature | 165 | °C | |
| Nozzle temperature | 170 to 180 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 21% O2 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |