Exxelor™ VA 1803

About
Exxelor VA 1803 polymer resin is a high flow, amorphous ethylene copolymer functionalized with maleic anhydride by reactive extrusion. Its fully saturated backbone results in outstanding thermal and oxidative stability leading to enhanced weatherability. Moreover, its amorphous nature exhibits impact resistance at very low temperatures in blends with engineering polymers such as polyamide. This grade is designed to: Modify the impact characteristics of the full range of polyamides for temperatures as low as -40°C (a function of the modifier treat level in the blend). Offer the best balance between stiffness and low temperature performance in polyamide blends. Modify the impact characteristics of other engineering thermoplastics and technical polymers (with or without glass fibers, fillers, etc.). Achieve compatibility between polyolefins and more polar polymers that are capable of interacting with maleic anhydride.&&

About

Exxelor VA 1803 polymer resin is a high flow, amorphous ethylene copolymer functionalized with maleic anhydride by reactive extrusion. Its fully saturated backbone results in outstanding thermal and oxidative stability leading to enhanced weatherability. Moreover, its amorphous nature exhibits impact resistance at very low temperatures in blends with engineering polymers such as polyamide. This grade is designed to: Modify the impact characteristics of the full range of polyamides for temperatures as low as -40°C (a function of the modifier treat level in the blend). Offer the best balance between stiffness and low temperature performance in polyamide blends. Modify the impact characteristics of other engineering thermoplastics and technical polymers (with or without glass fibers, fillers, etc.). Achieve compatibility between polyolefins and more polar polymers that are capable of interacting with maleic anhydride.&&

Product Description
Supplier	ExxonMobil
Generic	热塑性聚酯
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.86	g/cm³	DIN 53479
Melt Flow Rate
230℃，2.16kg	3.3	g/10min	ASTM D1238
230℃，10.0kg	22	g/10min	ASTM D1238
Collect volatile and compressible materials	<=0.15	%	AM-S 350.03

optical performance	Nominal value	Unit	Test method
Yellowness index	<=20	%	ASTM E313

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	-59	℃	ASTM D746
Linear coefficient of thermal expansion

Other performance	Nominal value	Unit	Test method
Maleic anhydride grafting rate	高		FTIR EPK-04 QT-02

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.