Epoxies, Ect. 50-3150 FR

About
50-3150 FR has been formulated to meet the stringent non-burning requirements of UL94 V-0. 50-3150 FR Black Epoxy with Catalyst 190 and Catalyst 30 are listed with Underwriter’s Laboratory for passing UL94 V-0. This system offers excellent heat transfer, low shrinkage, and outstanding insulation properties. 50-3150FR with Catalyst 30 has a UL (746B) Relative Temperature Index (RTI) rating of 130°C. 50-3150FR Black with Catalyst 190 passes NASA’s outgassing requirements per ASTM E595-07. Typical applications for 50-3150 FR include encapsulating power supplies, transformers, coils, insulators, sensors, etc… This system is an excellent choice for applications requiring high thermal conductivity and flame retardancy.&&

About

50-3150 FR has been formulated to meet the stringent non-burning requirements of UL94 V-0. 50-3150 FR Black Epoxy with Catalyst 190 and Catalyst 30 are listed with Underwriter’s Laboratory for passing UL94 V-0. This system offers excellent heat transfer, low shrinkage, and outstanding insulation properties. 50-3150FR with Catalyst 30 has a UL (746B) Relative Temperature Index (RTI) rating of 130°C. 50-3150FR Black with Catalyst 190 passes NASA’s outgassing requirements per ASTM E595-07. Typical applications for 50-3150 FR include encapsulating power supplies, transformers, coils, insulators, sensors, etc… This system is an excellent choice for applications requiring high thermal conductivity and flame retardancy.&&

Product Description
Generic	环氧树脂
Material Status	Commercial: Active
Features	Low contractility,Flame Characteristics,Thermal conductivity
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Shrinkage rate
MD	0.20	%

THERMAL	Nominal value	Unit
Linear coefficient of thermal expansion
MD	1.4E-5	1/℃
Thermal conductivity coefficient	2.2	W/m/K
Hot deformation temperature	155	℃

Supplementary information	Nominal value	Unit	Test method
working temperature	-60.0 to 200	℃
Outgassing	.5% TML .01% CVCM

Uncured Properties	Nominal value	Unit
colour	Black
Density
25℃	1.60	g/cm³
viscosity
25℃	60	Pa·s

Cured Properties	Nominal value	Unit
Shore hardness
Shaw’s D	90
tensile strength	67.9	MPa
compressive strength	103	MPa
Electrical strength	19	kV/mm
Relative permittivity
60 Hz	5.60
Volume resistivity
25 ℃	1.5E+15	ohms·cm
Dissipation factor
60 Hz	0.015

Notes
1. Typical properties: these are not to be construed as specifications.
2. Part A
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.