| About |
|---|
| Aclar Flex 180 is a 18-micron (0.70-mil) CTFE homopolymer high performance barrier film for the pharmaceutical and medical markets. Its high barrier and excellent dimensional stability make it ideal for flexible packaging applications such as pouches, overwraps, and lidding.&& |
| Product Description | |
|---|---|
| Supplier | Honeywell |
| Generic | PCTFE |
| Material Status | Commercial: Active |
| Features | Good Clarity,Good Dimensional Stability,Good disinfection,High pressure disinfection,Good tear strength,Block resin,Homopolymer |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 2.11 | g/cm³ | ASTM D1505 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 18 | µm | |
| Secant modulus | ASTM D882 | ||
| MD：18 µm | 2020 | MPa | ASTM D882 |
| TD：18 µm | 1320 | MPa | ASTM D882 |
| tensile strength | ASTM D882 | ||
| MD, yield, 18 µ m | 169 | MPa | ASTM D882 |
| TD, yield, 18 µ m | 34.1 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, yield, 18 µ m | 30 | % | ASTM D882 |
| TD, yield, 18 µ m | 370 | % | ASTM D882 |
| Water vapor transmittance | |||
| 18 µm，38℃，100% RH | 5.5E-3 | g·mm/m²/atm/24 hr | ASTM F1249 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Crystallization peak temperature | |||
| DSC | 211 | ℃ | ASTM D3418 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | |||
| 17.8 µm | < 1.0 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |