BIOPLAST® GS 2189

About
BIOPLAST GS 2189 is BIOTEC’s trademark for a completely new, plasticizer-free thermoplastic material. BIOPLAST GS 2189 is extremely suitable for sheet film extrusion, blown film extrusion and injection moulding of completely biodegradable products. The complete biodegradability and other functional properties enable the converter to advance in production areas, which could not be reached with traditional thermoplastic materials.&&

About

BIOPLAST GS 2189 is BIOTEC’s trademark for a completely new, plasticizer-free thermoplastic material. BIOPLAST GS 2189 is extremely suitable for sheet film extrusion, blown film extrusion and injection moulding of completely biodegradable products. The complete biodegradability and other functional properties enable the converter to advance in production areas, which could not be reached with traditional thermoplastic materials.&&

Product Description
Generic	热塑性聚酯
Material Status	Commercial: Active
Features	Good Rigidity,Good heat sealing,Renewable resources,Biodegradable,Food contact compliance,Good coloring
Availabilitys	Europe
Process Methods	Film extrusion

Technical Data
film	Nominal value	Unit	Test method
film thickness
test	> 10	µm	ISO 2286-3
tensile strength			DIN 53455
MD，23℃，10 µm	40.0 to 50.0	MPa
TD，23℃，10 µm	35.0 to 45.0	MPa
Carbon dioxide transfer rate
400 µm	150 to 200	cm³/m²/24 hr	ASTM D1434
Oxygen permeability (wet) (400 µ m)	40.0 to 60.0	cm³/m²/24 hr	ASTM F1927

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength			ISO 179
-20℃	75	kJ/m²
23℃	140	kJ/m²

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	60.0	℃	ISO 306/A120

PHYSICAL	Nominal value	Unit	Test method
Density	1.20 to 1.40	g/cm³	ISO 1183
Apparent density	0.88 to 0.94	g/cm³	ISO 60
Melt Flow Rate
190℃，2.16kg	15 to 40	g/10min	ISO 1133
water content		%	Internal Method
Particle size	2.00 to 3.00	mm
Melt density	1.10 to 1.30	g/cm³	ISO 1133

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.