Moplen EP340K - SOLIAO

About
Moplen EP340K is a nucleated impact copolymer suitable for injection moulding and thermoforming applications. Moplen EP340K exhibits an outstanding low temperature impact performance and good stiffness combined with a good processability. Moplen EP340K is typically used by customers in luggage, transport and cold storage crates, sports and leisure equipment, toys and typical consumer components which are subjected to impact and/or low temperature.&&

About

Moplen EP340K is a nucleated impact copolymer suitable for injection moulding and thermoforming applications. Moplen EP340K exhibits an outstanding low temperature impact performance and good stiffness combined with a good processability. Moplen EP340K is typically used by customers in luggage, transport and cold storage crates, sports and leisure equipment, toys and typical consumer components which are subjected to impact and/or low temperature.&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,High impact resistance,Nucleation,Food contact compliance,Block Copolymer,low-temperature impact resistance
Availabilitys	Africa & Middle East ,Europe
Process Methods	Thermo forming

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	4.0	g/10min	ISO 1133
Melt Volume Rate
230℃，2.16 kg	5.40	cm³/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179/1eA
-20℃	7.0	kJ/m²	ISO 179/1eA
0℃	13	kJ/m²	ISO 179/1eA
23℃	66	kJ/m²	ISO 179/1eA
Charpy Unnotch Impact strength			ISO 179/1eU
-20℃	230	kJ/m²	ISO 179/1eU
0℃	无断裂		ISO 179/1eU
23℃	无断裂		ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	85.0	℃	ISO 75-2/B
Toughness/brittle transition temperature	-57.0	℃	ISO 6603-2
Vicat Softening Temp
A50	140	℃	ISO 306/A50
B50	52.0	℃	ISO 306

MECHANICAL	Nominal value	Unit	Test method
Ball hardness
H358/30	46.0	MPa	ISO 2039-1
Tensile modulus	1100	MPa	ISO 527-2
tensile strength
yield	20.0	MPa	ISO 527-2
Tensile strain			ISO 527-2
yield	5.0	%	ISO 527-2
fracture	> 50	%	ISO 527-2

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.