| About |
|---|
| YUCLAIR DX800 is controlled medium density ethylene-1-octene-copolymer polyethylene for substituting XLPE. YUCLAIR DX800 offers excellent long term hydrostatic strength and brilliant pipe surface combined with good processability. It contains UV-stabilizer, for use in product requiring out-door weathering resistance.&& |
| Product Description | |
|---|---|
| Supplier | SKC |
| Generic | MDPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Excellent Processability,Copolymer |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.934 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.64 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | > 10000 | hr | ASTM D1693 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 53 | ASTM D2240 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| MD, fracture | 38.2 | MPa | ASTM D882 |
| Tensile strain | |||
| MD, fracture | 800 | % | ASTM D882 |
| Bending modulus | |||
| MD | 451 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 无断裂 | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 123 | ℃ | ASTM D1525 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |