Shandong PA/PP PA6/PP

About
Shandong PA/PP PA6/PP is a Polyamide 6 + PP (Nylon 6+PP) material. It is available in Asia Pacific. Important attributes of Shandong PA/PP PA6/PP are: Impact Resistant Moisture Resistant Wear Resistant Typical applications include: Electrical/Electronic Applications Appliances&&

Product Description
Supplier	Dongchen
Generic	PA 6+PP
Material Status	Commercial: Active
Features	High impact resistance,Low or no water absorption,Good wear resistance
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Water absorption rate
Capacity	< 1.2	%

MECHANICAL	Nominal value	Unit
tensile strength
yield	> 50.0	MPa
Tensile strain
fracture	> 80	%
bending strength	> 70.0	MPa

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	> 12	kJ/m²
Notched impact strength of cantilever beam	无断裂

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	> 170	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.