Kpren 130A - SOLIAO

About
Chlorinated polyethylene (CPE) is one of the leading products of Xuye new materials. The registered trademark is Kpren. The products cover all the important chlorinated polyethylene markets in both domestic and international. Xuye Kpren CPE is high molecular synthetic material that produced by HDPE. It is white power, which is thermoplastic elastomer. It has the performances like: heat-resisting, weather-proof, oil resistance, inflaming retarding, chemical resistance, ozone resistance, etc. It can be used as impact modifier for PVC hard product, which is largely used in the production of plastics doors and windows and the production of tubing. It can also be used as special rubber to replace neoprene, used in electric wire and hose tape industries. Xuye Kpren CPE is a low-energy, no pollution product. The use of this product plays an important role in the transform of traditional industries and the development of national economy. Kpren CPE130A: Magnetic rubber special brand. It has the characteristics like: good fallibility, high tensile strength, easy processing and low temperature resistance.&&

About

Chlorinated polyethylene (CPE) is one of the leading products of Xuye new materials. The registered trademark is Kpren. The products cover all the important chlorinated polyethylene markets in both domestic and international. Xuye Kpren CPE is high molecular synthetic material that produced by HDPE. It is white power, which is thermoplastic elastomer. It has the performances like: heat-resisting, weather-proof, oil resistance, inflaming retarding, chemical resistance, ozone resistance, etc. It can be used as impact modifier for PVC hard product, which is largely used in the production of plastics doors and windows and the production of tubing. It can also be used as special rubber to replace neoprene, used in electric wire and hose tape industries. Xuye Kpren CPE is a low-energy, no pollution product. The use of this product plays an important role in the transform of traditional industries and the development of national economy. Kpren CPE130A: Magnetic rubber special brand. It has the characteristics like: good fallibility, high tensile strength, easy processing and low temperature resistance.&&

Product Description
Supplier	Xuye
Generic	CPE
Material Status	Commercial: Active
Features	Weather resistance is good,Excellent Processability,Antifreeze,Flame Characteristics,Good Tensile Strength,Grease resistance,Ozone resistance,Heat Resistance, Good,Solvent resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Mooney viscosity
ML 1+4，125℃	80 to 90	MU	ISO 289
Chlorine content	28.0 to 32.0	wt%	ISO 1159
Volatiles	< 0.50	%	ISO 1269

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	< 60		ISO 7619

elastic body	Nominal value	Unit	Test method
tensile strength
fracture	> 8.00	MPa	ISO 37
Tensile strain
fracture	> 800	%	ISO 37

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.