Moplen HP653P - SOLIAO

About
Moplen HP653P Moplen HP653P is the polypropylene homopolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen HP653P is a homopolymer typically used in heavy denier BCF and CF multi-filament. Moplen HP653P resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.&&Moplen HP653P Moplen HP653P is a polypropylene hompolymer manufactured using the Spheripol process. With its excellent spinnability and drawability, it is particularly suitable for heavy denier BCF and CF multi-filament. Potential end use applications include carpet, automobile interiors and industrial products. This grade also exhibits better interlacing properties. Moplen HP652P can be evaluated for applications that require Anti-Gas Fading.&&

About

Moplen HP653P Moplen HP653P is the polypropylene homopolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen HP653P is a homopolymer typically used in heavy denier BCF and CF multi-filament. Moplen HP653P resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.&&Moplen HP653P Moplen HP653P is a polypropylene hompolymer manufactured using the Spheripol process. With its excellent spinnability and drawability, it is particularly suitable for heavy denier BCF and CF multi-filament. Potential end use applications include carpet, automobile interiors and industrial products. This grade also exhibits better interlacing properties. Moplen HP652P can be evaluated for applications that require Anti-Gas Fading.&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Soft,Solvent resistance,Homopolymer,Good coloring,Nucleation,Good surface appearance,Food contact compliance,Good Rigidity,High liquidity
Availabilitys	Africa & Middle East ,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	17	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Izod Notched Impact strength
23 ℃, injection molding	39.4	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature HDT
0.45 MPa, unannealed, injection molding	106	℃	ASTM D648
	153	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	105		ASTM D785
Tensile Strength
Injection Molding	37.2	MPa	ASTM D638
Tensile Strain
Injection Molding	10	%	ASTM D638

	1568	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.