Hylon® N7233HL

About
Nylon 6/12, 33% Glass Filled&&

Product Description
Generic	PA 6/12
Material Status	Commercial: Active
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.33	g/cm³	ISO 1183
Shrinkage rate
MD：3.2 mm	0.20 to 0.50	%	ISO 294-4
Water absorption rate
23℃，24hr	0.17	%	ISO 62

MECHANICAL	Nominal value	Unit	Test method
tensile strength
fracture	148	MPa	ISO 527-2
Tensile strain
fracture	3.0	%	ISO 527-2
Bending modulus	8270	MPa	ISO 178
bending strength	221	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	6.0	kJ/m²	ISO 180

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	196	℃	ISO 75-2/A

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.