Fluon® PTFE G350

About
Fluon®PTFE granular powders (moulding powders) are used for the production of sheets, rods, billets and other general mouldings. Filled compounds are described in other page. Applications: general moulding for G307, G340 and G350 automatic moulding for G307, G340 and G350 isostatic moulding for G307, G340 and G350 rod (diameter 20mm) and pipe by ram extrusion for G307 Characteristics: agglomerated (free flowing) unsintered powders. the best powder flow for G307. good surface finish and high bulk density for G340 and G350 the highest bulk density for G350.&&

About

Fluon®PTFE granular powders (moulding powders) are used for the production of sheets, rods, billets and other general mouldings. Filled compounds are described in other page. Applications: general moulding for G307, G340 and G350 automatic moulding for G307, G340 and G350 isostatic moulding for G307, G340 and G350 rod (diameter 20mm) and pipe by ram extrusion for G307 Characteristics: agglomerated (free flowing) unsintered powders. the best powder flow for G307. good surface finish and high bulk density for G340 and G350 the highest bulk density for G350.&&

Product Description
Supplier	Asahi Glass
Generic	PTFE
Material Status	Commercial: Active
Features	Good surface appearance
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Apparent density	0.92	g/cm³	JIS K6891
Shrinkage rate	2.8	%	ISO 294-4

MECHANICAL	Nominal value	Unit	Test method
tensile strength	39.0	MPa	JIS K6891
Tensile strain
fracture	350	%	JIS K6891

Supplementary information	Nominal value	Unit	Test method
Average particle size	350.0	µm	ASTM D1457

Process Conditions
injection	Nominal value	Unit	Test method
Injection pressure	30.0	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.