API II 505 - SOLIAO

About
Product Description: API II 505 is an intermediate grade of impact modified polystyrene. This material has improved gloss, rigidity and color ability. Application: API II 505 is widely used in house wares, toys, containers, POP displays and a wide range of injection molded applications. Complies with FDA regulation 21 CFR 177.1640.&&

Product Description
Generic	PS (MIPS)
Material Status	Commercial: Active
Features	Good Rigidity,Good surface appearance,High impact resistance,Good coloring
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.04	g/cm³	ASTM D892
Melt Flow Rate
200℃，5.0kg	8.0	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
3.2mm	69	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, annealed	85.0	℃	ASTM D648
Vicat Softening Temp	93.9	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
Level L	48		ASTM D785
Tensile modulus	1790	MPa	ASTM D638
tensile strength
fracture	28.3	MPa	ASTM D638
Tensile strain
fracture	35	%	ASTM D638
Bending modulus	2070	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.