| About |
|---|
| CELLENE™ MC3038 is a translucent, nontoxic, halogen and phthalate free, flexible thermoplastic elastomer compound developed specifically for extrusion applications in the food and medical industries. All components used in the manufacturing of CELLENE™ MC3038 are compliant for food applications under Title 21 of the Code of Federal Regulations administered by the US Food & Drug Administration. Compound CELLENE™ MC3038 is designed to meet the requirements of USP Class VI. To comply with the requirements of the medical industry, complete traceability and lot identification of all components and finished products are maintained.&& |
| Product Description | |
|---|---|
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Good flexibility,Steam sterilized,Halogen free,Low density,Radiation disinfection,Good compressive strength,Nontoxicity,Ethylene oxide disinfection |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| elastic body | Nominal value | Unit | Test method |
| Compression deformation | |||
| 23℃，22 hr | 22 | % | |
| 70℃，22 hr | 45 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 15 seconds | 38 | ASTM D2240 | |
| Tensile modulus | 1.30 | MPa | ASTM D638 |
| tensile strength | 2.70 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 560 | % | ASTM D638 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 0.878 | g/cm³ | ASTM D792 |
| Apparent viscosity of melt | |||
| 200℃，2000 sec^-1 | 33.0 | Pa·s | ASTM D3835 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Proposed maximum recycled material ratio | 20 | % | |
| Barrel 1 zone temperature | 66 to 74 | °C | |
| Barrel 2 zone temperature | 177 to 188 | °C | |
| Barrel 3 zone temperature | 188 to 199 | °C | |
| Barrel 4 zone temperature | 193 to 204 | °C | |
| Melt temperature | 188 to 199 | °C | |
| Nozzle temperature | 199 to 210 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 100% Strain |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |