Hifax CA 12 A - SOLIAO

About
Hifax CA 12 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell’s proprietary Catalloy process technology. It is suitable for industrial applications where a combination of good processability and excellent softness is required. Hifax CA 12 A exhibits low stiffness, low hardness and good impact resistance. The material shows high compatibility to other polyolefins as well as to other soft plastics. Hifax CA 12 A is cross linkable. The grade is available in natural pellet form.&&

About

Hifax CA 12 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell’s proprietary Catalloy process technology. It is suitable for industrial applications where a combination of good processability and excellent softness is required. Hifax CA 12 A exhibits low stiffness, low hardness and good impact resistance. The material shows high compatibility to other polyolefins as well as to other soft plastics. Hifax CA 12 A is cross linkable. The grade is available in natural pellet form.&&

Product Description
Supplier	LyondellBasell
Generic	PP not specified
Material Status	Commercial: Active
Features	Good flexibility,High impact resistance,Crosslinked,Low Hardness,Heat Resistance, Good,Solvent resistance,low-temperature impact resistance,Nontoxicity,High ESCR
Availabilitys	Africa & Middle East ,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.880	g/cm³	ISO 1183/A
Melt Flow Rate
230℃，2.16kg	0.80	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ISO 180/1A
-20℃	70	kJ/m²	ISO 180-1A
23℃	无断裂		ISO 180/1A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	50.0	℃	ISO 75-2/B
Vicat Softening Temp
A50	78.0	℃	ISO 306/A50
Melting temperature	163	℃	Internal Method , ISO 11357-3

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	36		ISO 868
tensile strength
yield	9.00	MPa	ISO 527-2
Tensile strain
fracture	500	%	ISO 527-2
Bending modulus	330	MPa	ISO 178

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.