CEFOR™ 1211P

About
CEFOR 1211P is a butene Linear Low Density Polyethylene for general blown film applications. Main Characteristics: Used in Industrial, Food & Specialty Packaging Better optics and processability Better color stability Good sealing performance Complies with: U.S. FDA 21 177.1520 (c) 3.2a EU. No 10/2011 Consult the regulations for complete details. Additive: Antiblock: No Slip: No Processing Aid: No&&

About

CEFOR 1211P is a butene Linear Low Density Polyethylene for general blown film applications. Main Characteristics: Used in Industrial, Food & Specialty Packaging Better optics and processability Better color stability Good sealing performance Complies with: U.S. FDA 21 177.1520 (c) 3.2a EU. No 10/2011 Consult the regulations for complete details. Additive: Antiblock: No Slip: No Processing Aid: No&&

Product Description
Supplier	DOW
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.918	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	1.0	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	51	µm
Membrane puncture resistance
51 µm	8.19	J/cm³	Internal Method
Secant modulus			ASTM D882
2% secant, MD: 51 µ m	183	MPa
2% secant, TD: 51 µ m	217	MPa
tensile strength			ASTM D882
MD, yield, 51 µ m	10.3	MPa
TD, yield, 51 µ m	11.0	MPa
MD, fracture, 51 µ m	31.7	MPa
TD, fracture, 51 µ m	25.0	MPa
Tensile strain			ASTM D882
MD, fracture, 51 µ m	660	%
TD, fracture, 51 µ m	710	%
Drop hammer impact
51 µm	100	g	ASTM D1709-A
Elmandorf tear strength			ASTM D1922
MD：51 µm	110	g
TD：51 µm	260	g

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	101	℃	ASTM D1525
Melting temperature
DSC	116	℃	Internal Method

optical performance	Nominal value	Unit	Test method
gloss
20°，50.8 µm	69		ASTM D2457
Haze
50.8 µm	11	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.