Kanghui KH2100F

About
PBT is made from PTA and BD which form into polybutylene terephthalate (referred as PBT) after the continuous process of esterification and polycondensation. It is a kind of crystalline and thermoplastic polyester with the features of high heat resistance, toughness, fatigue resistance, high insulation resistance, dimensional stability, preferable elasticity and dyeing property and used in the field of automotive, electronic and electrical appliances, industrial machinery, civil and industrial textile, polymer alloy and blending industry, etc..&&

About

PBT is made from PTA and BD which form into polybutylene terephthalate (referred as PBT) after the continuous process of esterification and polycondensation. It is a kind of crystalline and thermoplastic polyester with the features of high heat resistance, toughness, fatigue resistance, high insulation resistance, dimensional stability, preferable elasticity and dyeing property and used in the field of automotive, electronic and electrical appliances, industrial machinery, civil and industrial textile, polymer alloy and blending industry, etc..&&

Product Description
Supplier	Kanghui
Generic	polybutylene terephthalate
Material Status	Commercial: Active
Features	Good flexibility,High Heat Resistance,Fatigue resistance,Good Dimensional Stability
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.30 to 1.32	g/cm³	ASTM D792
Melt Flow Rate
250℃，2.16kg	23 to 30	g/10min	ASTM D1238
Color b	1.00 to 3.00		Q/KHS001
Color L	> 95.0		Q/KHS001
Particle Mass	1.90 to 2.10	g/100 pcs	Q/KHS001
Intrinsic viscosity	0.993	dl/g	Q/KHS001
water content	0.02	%	Q/KHS001
Ash Content	150	mg/kg	Q/KHS001
Color value
L	96
b	2.1

MECHANICAL	Nominal value	Unit	Test method
tensile strength	50.0 to 60.0	MPa	ASTM D638
Tensile strain
fracture	> 150	%	ASTM D638

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	> 39	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Melting temperature	> 222	℃	Q/KHS001
melting point	223.9	℃	DSC

Electrical performance	Nominal value	Unit	Test method
Dielectric strength
2 mm	> 20	kV/mm	ASTM D149

Supplementary information	Nominal value	Unit	Test method
End carboxyl group content	21	mol/t	Q/KHS001
Hundred grain weight	2.09	g

Process Conditions
	Nominal value	Unit	Test method

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.