| About |
|---|
| Product performance: metallized layer have good adhesion, well proportioned, high brightness good barrier function Excellent printing properties Application :VMBOPP is made of bopp metallized with aluminum under vacuum environment at a high temperature, it is widely used in the industry of packaging, decoration, label, adhesive, gift packing and others&& |
| Product Description | |
|---|---|
| Supplier | Jinxin |
| Generic | BOPP |
| Material Status | Commercial: Active |
| Features | Good Printability,Good bond,Block resin,Metallized |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| friction coefficient | 0.35 | ASTM D1894 | |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 20 | µm | ASTM D374 |
| tensile strength | ASTM D882 | ||
| MD, fracture | 130 | MPa | ASTM D882 |
| TD, fracture | 268 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, fracture | 170 | % | ASTM D882 |
| TD, fracture | 50 | % | ASTM D882 |
| Sealing emphasis | 0.28 | N/mm |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | 0.90 | % | ASTM D1003 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermal shrinkage | ASTM D1204 | ||
| MD | 3.8 | % | ASTM D1204 |
| TD | 1.2 | % | ASTM D1204 |
| Wetting Tension | 38 | dyne/cm | ASTM D2578 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 120°C/2min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |