TITANPRO® JM-370K

About
Titanpro JM-370K is a high flow material. The base meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520(a)(3)(i) and (c)3.1a. The adjuvants meet their respective FDA regulations and 21 CFR 177.1520(b). In summary, this resin meets the FDA criteria covering safe use of polyolefin articles and component of articles intended for food contact use. TSCA Registry: CAS# 9010-79-1. APPLICATIONS Huge home appliances case and cover, washing machine tub, automotive parts, housewares, large flat trays, thin walled articles, base resin for compounding, furniture. ADVANTAGES: Easy processability, permitting wider latitude in design. Good balance of strength and impact resistance. Good toughness at low temperature. Good surface finish and color. Improvement in mold release and anti-static. Low molded in stresses. FABRICATION Equipment – ram or screw injection machines. Techniques – standard processing.&&

About

Titanpro JM-370K is a high flow material. The base meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520(a)(3)(i) and (c)3.1a. The adjuvants meet their respective FDA regulations and 21 CFR 177.1520(b). In summary, this resin meets the FDA criteria covering safe use of polyolefin articles and component of articles intended for food contact use. TSCA Registry: CAS# 9010-79-1. APPLICATIONS Huge home appliances case and cover, washing machine tub, automotive parts, housewares, large flat trays, thin walled articles, base resin for compounding, furniture. ADVANTAGES: Easy processability, permitting wider latitude in design. Good balance of strength and impact resistance. Good toughness at low temperature. Good surface finish and color. Improvement in mold release and anti-static. Low molded in stresses. FABRICATION Equipment – ram or screw injection machines. Techniques – standard processing.&&

Product Description
Supplier	LOTTE
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Food contact compliance,Low temperature toughness,Antistatic property,Impact copolymer,Good coloring
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	30	g/10min	ASTM D1238
Shrinkage rate
MD	1.3 to 1.4	%
Water absorption rate
24hr	0.020	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	78	J/m	ASTM D256-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	85.0	℃	ASTM D648

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	85		ASTM D785
tensile strength
yield	22.6	MPa	ASTM D638
Tensile strain
yield	6.0	%	ASTM D638
Bending modulus	1100	MPa	ASTM D790B

Notes
1. CAS# 9010-79-1
2. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.