| About |
|---|
| Vikalloy P90 is an Acrylic (PMMA) + PVC (PMMA+PVC) material. It is available in Asia Pacific, Europe, or North America for profile extrusion. Important attributes of Vikalloy P90 are: Chemical Resistant Flame Retardant&& |
| Product Description | |
|---|---|
| Generic | PMMA+PVC |
| Material Status | Commercial: Negative |
| Features | Clean,Flame Characteristics,Solvent resistance |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Profile extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.47 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 51.8 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 200 | % | ASTM D638 |
| Bending modulus | 2990 | MPa | ASTM D790 |
| bending strength | 76.5 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 64 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, annealed | 74.4 | ℃ | ASTM D648 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 160 to 182 | °C | |
| Barrel 2 zone temperature | 160 to 182 | °C | |
| Barrel 3 zone temperature | 160 to 182 | °C | |
| Barrel 4 zone temperature | 160 to 182 | °C | |
| Barrel 5 zone temperature | 160 to 182 | °C | |
| Connector temperature | 171 to 177 | °C | |
| Nozzle temperature | 171 to 177 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |