| About |
|---|
| EM30010 is semi-crystalline biodegradable, aliphatic bio-polyester designed for use in extrude tube applications. EM30010 is PHA base compound with PLA and some additives. EM30010 is certificated to meet EN13432 & ASTM D6400 standards for biodegradable plastics. Typical applications: Shampoo bottles, cosmetics bottles&& |
| Product Description | |
|---|---|
| Supplier | Ecomann |
| Generic | PHA |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good surface appearance,Renewable resources,Biodegradable,Hypocrystalline,Aliphatic series,High molecular weight,Compostable,Block resin,Good coloring |
| Availabilitys | Asia Pacific |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.24 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 170℃，2.16kg | 4.0 | g/10min | ASTM D1238 |
| Water absorption rate | |||
| balance | < 0.40 | % | ASTM D570 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Oxygen transfer rate | |||
| 40℃，90% RH，130 µm | 130 | cm³/m²/24 hr | |
| Water vapor transmittance | |||
| 25℃，90% RH，130 µm | 15 | g/m²/24 hr |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 70.0 | ℃ | ASTM D1525 2 |
| Melting temperature | 130 to 150 | ℃ | DSC |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Yellowness index | 50 | YI | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 55 | ISO 868 | |
| tensile strength | 15.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 200 | % | ASTM D638 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 80 | °C | |
| Drying time | 3.0 | hr | |
| Barrel 1 zone temperature | 115 to 130 | °C | |
| Barrel 3 zone temperature | 125 to 135 | °C | |
| Barrel 5 zone temperature | 130 to 145 | °C | |
| Nozzle temperature | 115 to 130 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Rate B (120°C/h), Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |