Eleme NGH200IG

About
NGH200IG High Density Polyethylene Resin manufactured by IEPL using “SCLAIRTECH” solution polymerisation process of DU Pont, Canada (Now Nova Chemicals) offers medium molecular weight material with very narrow molecular weight distribution to impart excellent mechanical properties, high gloss and surface finishing to injection moulded parts like general housewares, toys, containers, caps, lids, small pails, etc.&&

About

NGH200IG High Density Polyethylene Resin manufactured by IEPL using “SCLAIRTECH” solution polymerisation process of DU Pont, Canada (Now Nova Chemicals) offers medium molecular weight material with very narrow molecular weight distribution to impart excellent mechanical properties, high gloss and surface finishing to injection moulded parts like general housewares, toys, containers, caps, lids, small pails, etc.&&

Product Description
Generic	HDPE
Material Status	Commercial: Active
Features	Excellent Processability,Good surface appearance,High impact resistance,Good Dimensional Stability,Weight distribution
Availabilitys	Africa & Middle East ,North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.958	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	19	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam	88	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	126	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	69		ASTM D2240
tensile strength
yield	25.0	MPa	ASTM D638
Tensile strain
fracture	500	%	ASTM D638
Bending modulus	900	MPa	ASTM D790
bending strength
yield	30.0	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.