KetaSpire® KT-810FP

About
KetaSpire® KT-810FP is the fine powder form of KT-810 resin. KT-810 is an ultra-high molecular weight natural PEEK resin having a melt viscosity ranging from 0.51-0.65 kPa-s as compared to 0.38-0.50 kPa-s for standard high-viscosity PEEK grades such as KT-820 and its fine powder analog KT-820FP. KetaSpire® PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties, which include excellent chemical resistance to organics, acids and bases; exceptional retention of mechanical properties up to 300°C (572°F); best-in-class fatigue resistance; excellent wear resistance; ease of melt processing; and high purity. The KT-810 grade achieves a greater level of mechanical toughness than previously possible with PEEK, yet it is still processable by conventional methods including extrusion, injection molding, and compression molding. KetaSpire® KT-810FP is designed for compression molding applications such as machined parts and stock shapes wherein the fine powder form is easier to work with in a compression molding process. The KT-810FP comes with a median particle size that is typically in the 35-50 micrometers (µm) range. The KT-810 grade is available for extrusion and injection molding processing in natural pellet form under the grade name KT-810 NT.&&

About

KetaSpire® KT-810FP is the fine powder form of KT-810 resin. KT-810 is an ultra-high molecular weight natural PEEK resin having a melt viscosity ranging from 0.51-0.65 kPa-s as compared to 0.38-0.50 kPa-s for standard high-viscosity PEEK grades such as KT-820 and its fine powder analog KT-820FP. KetaSpire® PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties, which include excellent chemical resistance to organics, acids and bases; exceptional retention of mechanical properties up to 300°C (572°F); best-in-class fatigue resistance; excellent wear resistance; ease of melt processing; and high purity. The KT-810 grade achieves a greater level of mechanical toughness than previously possible with PEEK, yet it is still processable by conventional methods including extrusion, injection molding, and compression molding. KetaSpire® KT-810FP is designed for compression molding applications such as machined parts and stock shapes wherein the fine powder form is easier to work with in a compression molding process. The KT-810FP comes with a median particle size that is typically in the 35-50 micrometers (µm) range. The KT-810 grade is available for extrusion and injection molding processing in natural pellet form under the grade name KT-810 NT.&&

Product Description
Supplier	Solvay
Generic	PEEK
Material Status	Commercial: Active
Features	High impact resistance,Good Dimensional Stability,Ductility,Good disinfection,Steam sterilized,Gamma radiation,E-beam disinfection,Flame Characteristics,High pressure disinfection,High Heat Resistance,Radioactive,Fatigue resistance,Radiation disinfection,Solvent resistance,Resistance to the steam,Ethylene oxide disinfection,Heat sterilization
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	3500	MPa	ASTM D638
tensile strength
yield	94.5	MPa	ASTM D638
Tensile strain			ASTM D638
yield	5.2	%	ASTM D638
fracture	25 to 50	%	ASTM D638
Bending modulus	3700	MPa	ASTM D790
bending strength	145	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	100	J/m	ASTM D256
Notched impact strength of cantilever beam	无断裂		ASTM D4812

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, annealed, 3.2 mm	157	℃	ASTM D648

PHYSICAL	Nominal value	Unit	Test method
Density	1.29	g/cm³	ASTM D792
Water absorption rate
24hr	0.10	%	ASTM D570
Particle size
Retention on 100 Mesh Sieve	0.00	%
Retention on 140 Mesh Sieve	< 2.00	%
Apparent viscosity of melt
400℃，1000 sec^-1	510 to 650	Pa·s	ASTM D3835

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.