Jam PE 10501 - SOLIAO

About
10501 is a VLDPE blown film grade particularly suited for lamination and coextrusion application, as adhesive layer. 10501 is designed for applications requiring low film stiffness, good sealability and high strenth at low temperatures. Features Low film stiffness Good sealability High strength at low temperatures Applications Blown film grade Lamination Lamination and coextrusion application, as adhesive layer&&

About

10501 is a VLDPE blown film grade particularly suited for lamination and coextrusion application, as adhesive layer. 10501 is designed for applications requiring low film stiffness, good sealability and high strenth at low temperatures. Features Low film stiffness Good sealability High strength at low temperatures Applications Blown film grade Lamination Lamination and coextrusion application, as adhesive layer&&

Product Description
Supplier	Jam
Generic	VLDPE
Material Status	Commercial: Active
Availabilitys	Africa & Middle East

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.910	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.95	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness	15.0 to 50.0	µm
test	25	µm
Secant modulus			ASTM D882
2% secant, MD: 25 µ m, blow molded film	105	MPa	ASTM D882
2% secant, TD: 25 µ m, blow molded film	115	MPa	ASTM D882
Drop hammer impact
25 µ m, blow molded film	210	g	ASTM D1709
Elmandorf tear strength			ASTM D1922
MD: 25 µ m, blow molded film	200	g	ASTM D1922
TD: 25 µ m, blow molded film	400	g	ASTM D1922

optical performance	Nominal value	Unit	Test method
gloss
45 °, 25 µ m, blow molded film	35		ASTM D2457
Haze
25 µ m, blow molded film	25	%	ASTM D1003

Supplementary information	Nominal value	Unit	Test method
Blow（up Ratio）	2.00 to 3.00

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	200 to 230	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.