EPITEC® PC-910FH

About
EPITEC® PC-910FH is a Polycarbonate (PC) material. It is available in North America. Primary attribute of EPITEC® PC-910FH: Flame Rated.&&

Product Description
Generic	Polycarbonate
Material Status	Commercial: Active
Features	V-2
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.20	g/cm³	ASTM D792
Melt Flow Rate
300℃，1.20kg	20	g/10min	ASTM D1238
Shrinkage rate
MD	0.50 to 0.70	%	ASTM D955

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	690	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	129	℃	ASTM D648
Relative temperature index	105	℃	UL 746
Impact mechanical performance	105	℃	UL 746

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
1.50 mm	V-2		UL 94

Supplementary information	Nominal value	Unit	Test method
Weathering resistance	f2		UL 746C

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	112		ASTM D785
Tensile modulus	2170	MPa	ASTM D638
tensile strength	60.7	MPa	ASTM D638
Bending modulus	2410	MPa	ASTM D790
bending strength	93.1	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.