EQUATE PE EPDA-5040

About
EPDA-5040 is a high molecular weight high density polyethylene copolymer resin designed for non-pressure gravity pipe applications. It has a good balance of flexibility, ductility, stiffness and toughness for exceptional freedom in pipe designing. It also offers excellent resistance to environmental stress cracking. EPDA-5040 has been adequately stabilized for long-term service life durability. The product’s broad molecular weight distribution provides for easy procesability in to pipe with smooth pipe surfaces and good dispersion of pigments, and carbon black for protection against UV light. EPDA-5040 applications include gravity pipe systems for underground drainage and sewage. It is suitable for both straight and structured wall pipes. In addition it can also be used for extruding electrical conduits.&&

About

EPDA-5040 is a high molecular weight high density polyethylene copolymer resin designed for non-pressure gravity pipe applications. It has a good balance of flexibility, ductility, stiffness and toughness for exceptional freedom in pipe designing. It also offers excellent resistance to environmental stress cracking. EPDA-5040 has been adequately stabilized for long-term service life durability. The product’s broad molecular weight distribution provides for easy procesability in to pipe with smooth pipe surfaces and good dispersion of pigments, and carbon black for protection against UV light. EPDA-5040 applications include gravity pipe systems for underground drainage and sewage. It is suitable for both straight and structured wall pipes. In addition it can also be used for extruding electrical conduits.&&

Product Description
Generic	HDPE copolymer
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Good flexibility,Wide molecular weight distribution,Ductility,High molecular weight,Copolymer,High density,High ESCR
Availabilitys	Africa & Middle East ,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.952	g/cm³	ASTM D792
Melt Flow Rate
190℃，21.6kg	10	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
50 ℃, 100% non-ionic surfactant, F50	> 1000	hr	ASTM D1693B

MECHANICAL	Nominal value	Unit	Test method
tensile strength			ASTM D638
yield	26.0	MPa	ASTM D638
fracture	35.0	MPa	ASTM D638
Tensile strain
fracture	> 750	%	ASTM D638
Bending modulus	1180	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	17.0	kJ/m²	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	99.0	℃	ASTM D648
Vicat Softening Temp	130	℃	ASTM D1525
Melting temperature	135	℃	DSC
Crystallization peak temperature
DSC	113	℃	Internal Method
Linear coefficient of thermal expansion
MD	1.5E-4	1/℃	ASTM D696

Process Conditions
Extrusion	Nominal value	Unit	Test method
Barrel 1 zone temperature	200	°C
Barrel 2 zone temperature	205	°C
Barrel 3 zone temperature	205	°C
Barrel 4 zone temperature	205	°C
Connector temperature	205	°C
Melt temperature	210	°C
Nozzle temperature	205	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.