POLYPRO® 5014

About
POLYPRO® 5014 is a Polypropylene Homopolymer (PP Homopolymer) material. It is available in Asia Pacific. Primary attribute of POLYPRO® 5014: Homopolymer. Typical applications include: Adhesives/Tapes Food Contact Applications Straps/Ropes Yarn&&

Product Description
Supplier	YUHWA
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Homopolymer
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	3.2	g/10min	ASTM D1238
Shrinkage rate
MD	1.0 to 2.0	%	Internal Method
Water absorption rate
balance	< 0.010	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	39	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	105	℃	ASTM D648
Vicat Softening Temp	152	℃	ASTM D1525
Melting peak temperature	162	℃	ASTM D3418

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	96		ASTM D785
tensile strength
yield	35.3	MPa	ASTM D638
Tensile strain
fracture	> 500	%	ASTM D638
Bending modulus	1470	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.