| About |
|---|
| A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer family that offers good physical properties and chemical resistance. Bondable to: PP, EVA, PE&& |
| Product Description | |
|---|---|
| Generic | TPV |
| Material Status | Commercial: Active |
| Features | Solvent resistance,Soft,Agglomerability,HB |
| Availabilitys | Africa & Middle East ,North America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.970 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| TD | 1.2 | % | ASTM D955 |
| MD | 3.0 | % | ASTM D955 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 5.00 | MPa | ASTM D412 |
| 300% strain | 2.80 | MPa | ASTM D412 |
| 100% strain | 1.40 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 600 | % | ASTM D412 |
| tear strength | 30.0 | kN/m | ASTM D624 |
| Compression deformation | ASTM D395 | ||
| 23℃，22 hr | 17 | % | ASTM D395 |
| 70℃，22 hr | 32 | % | ASTM D395 |
| 100℃，22 hr | 45 | % | ASTM D395 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 55 | ASTM D2240 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HB | UL 94 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Ozone resistance | |||
| Stressed | No Cracks | ASTM D518 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 90 | °C | |
| Drying time | 2.0 | hr | |
| Proposed maximum recycled material ratio | 20 | % | |
| Barrel rear temperature | 155 to 175 | °C | |
| Barrel middle temperature | 165 to 185 | °C | |
| Barrel front temperature | 170 to 190 | °C | |
| Nozzle temperature | 180 to 210 | °C | |
| Mold temperature | 25 to 50 | °C | |
| Drying temperature | 90 | °C | |
| Drying time | 2.0 | hr | |
| Barrel 1 zone temperature | 155 to 165 | °C | |
| Barrel 2 zone temperature | 160 to 180 | °C | |
| Barrel 3 zone temperature | 165 to 185 | °C | |
| Barrel 4 zone temperature | 170 to 190 | °C | |
| Barrel 5 zone temperature | 180 to 210 | °C | |
| Nozzle temperature | 185 to 215 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |