| About |
|---|
| FRIANYL® A3 RV0 is an unfilled Polyamide 66 (Nylon 66) compound, heat stabilized, flame retardant, halogen and red phosphorous free, UL listed V0. It is VDE certified. It is also certified according to railways requirements EN45545-2 and NFF 16-101. This compound is intended for injection molding. FRIANYL® A3 RV0 is primarily designed for the Electrical and Electronic industry. It is also suitable for Automotive or Industrial & Consumer applications.&& |
| Product Description | |
|---|---|
| Supplier | Celanese |
| Generic | PA66 |
| Material Status | Commercial: Active |
| Features | Heat Stabilized,Flame Characteristics,Halogen free,V-0,Low to no phosphorus content |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1160 | kg/m³ | ISO 1183 |
| Forming shrinkage rate | |||
| flow | 1.2-1.6 | % | ISO 294-4,257 |
| transverse | 1.2-1.6 | % | ISO 294-4,257 |
| Water absorption rate | |||
| 23℃ | 7.4 | % | ISO 62 |
| Temperature absorption | |||
| 23°C/50%RH | 2.1 | % | ISO 62 |
| Viscosity number | |||
| PA sulfuric acid | 145 | ml/g | ISO 307 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 3500/- | MPa | ISO 527-1，-2 |
| Tensile stress | |||
| Yield 50mm/min | 80/- | MPa | ISO 527-1，-2 |
| Tensile strain | |||
| Yield 50mm/min | 3.5/- | % | ISO 527-1，-2 |
| Fracture 50mm/min | 10/- | % | ISO 527-1，-2 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | |||
| 23°C | 50/- | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength | |||
| 23°C | 3/- | kJ/m² | ISO 179/1eA |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | |||
| 20°C/min | 260 | ℃ | ISO 11357-1/-3 |
| Thermal deformation temperature under load | |||
| 1.8 MPa | 80 | ℃ | ISO 75-1，-2 |
| 0.45 MPa | 190 | ℃ | ISO 75-1，-2 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| FMVSS | SE | ISO 3795 | |
| Flammability | |||
| Thickness 3.2mm | V-0 | class | UL 94 |
| Thickness 1.6 mm | V-0 | class | UL 94 |
| Thickness 0.8 mm | V-0 | class | UL 94 |
| Thickness 0.4 mm | V-0 | class | UL 94 |
| Test thickness | |||
| h | 0.25 | mm | UL 94 |
| h | UL | UL 94 | |
| Burning wire flammability index | |||
| 0.8mm | 960 | ℃ | IEC 60695-2-12 |
| 3.2 mm | 960 | ℃ | IEC 60695-2-12 |
| Ball pressure test | 175 | ℃ | IEC 60695-10-2 |
| Continuous operating temperature | 130 | ℃ | DIN/IEC 60216-1 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | |||
| 23°C | ＞1E12/- | ohm·m | IEC 62631-3-1 |
| Compared to the leakage tracing index | |||
| PLC 0/- | UL 746 | ||
| Group l | IEC 60112 | ||
| CTI | |||
| 50 drops | 600 | V | IEC 60112 |
| 100 drops | 600 | V | IEC 60112 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 20000 hr |
| 3. 23°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |