| About |
|---|
| KEY FEATURES UmaPET UL is ultra high clear film having very Low Haze, high clarity and gloss. Excellent frictional and thermal properties alongwith excellent process ability. APPLICATIONS The film is used for various graphic and optical applications; labels face stocks, as safety window film, pressure sensitive labels, Hologram, glitter powder and Packaging applications. UL complies with FDA regulation 21CFR177.1630 sections (f) and (g) for direct and in-direct food contact.&& |
| Product Description | |
|---|---|
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Clarity,Good surface appearance,Optical performance,Low coefficient of friction,Food contact compliance |
| Availabilitys | Africa & Middle East ,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Shrinkage rate | ASTM D1204 | ||
| MD：150℃，0.036 mm，30 min | 2.5 | % | |
| MD：150℃，0.05 mm，30 min | 2.5 | % | |
| TD：150℃，0.036 mm，30 min | 0.40 | % | |
| TD：150℃，0.05 mm，30 min | 0.40 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| friction coefficient | ASTM D1894 | ||
| With oneself – dynamic | 0.40 | ||
| With oneself – dynamic | 0.40 | ||
| With oneself – static | 0.45 | ||
| With oneself – static | 0.45 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 36 50 | µm | |
| film thickness | 36, 50 µm | ||
| tensile strength | ASTM D882 | ||
| MD, fracture, 36 µ m | 177 | MPa | |
| MD, fracture, 50 µ m | 167 | MPa | |
| TD, fracture, 36 µ m | 186 | MPa | |
| TD, fracture, 50 µ m | 186 | MPa | |
| Tensile strain | ASTM D882 | ||
| MD, fracture, 36 µ m | 130 | % | |
| MD, fracture, 50 µ m | 130 | % | |
| TD, fracture, 36 µ m | 120 | % | |
| TD, fracture, 50 µ m | 120 | % | |
| dosage | Internal Method | ||
| 36.0 µm | 19.8 | m²/kg | |
| 50.0 µm | 14.3 | m²/kg |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Transmittance | ASTM D1003 | ||
| 36.0 µm | 90.0 | % | |
| 50.0 µm | 90.0 | % | |
| Haze | ASTM D1003 | ||
| 36 µm | 1.0 | % | |
| 50 µm | 1.2 | % |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Wetting Tension – Plain side | ASTM D2578 | ||
| 36.0 µm | 44 | dyne/cm | |
| 50.0 µm | 44 | dyne/cm |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |