Teflon® FFR 430

About
DuPont™ Teflon ® FFR 430 fluoroplastic foam resin has been developed with a superior nucleant package to provide improved foam cell structure and a broader processing window. It has the lowest melt flow (7) of the FFR resins, making it best suited for the larger plenum coax cables, particularly when the lowest smoke generation is a key design consideration. The foamed insulation of Teflon ® FFR 430 fluoroplastic foam resin provides high-speed data transmission with minimal distortion, and good cable structural return loss with reduced attenuation. FFR 430 offers cable designers opportunities for reducing cable size with cable weight savings or the use of larger conductors to construct low-loss cables without the need for increased dielectric dimensions. This resin is supplied as white pellets, and is used in a nitrogen gas-injected foam extrusion process to produce uniform foam cells in the insulation. Achievable cell size and void content will vary based on wall thickness and processing conditions.&&

About

DuPont™ Teflon ® FFR 430 fluoroplastic foam resin has been developed with a superior nucleant package to provide improved foam cell structure and a broader processing window. It has the lowest melt flow (7) of the FFR resins, making it best suited for the larger plenum coax cables, particularly when the lowest smoke generation is a key design consideration. The foamed insulation of Teflon ® FFR 430 fluoroplastic foam resin provides high-speed data transmission with minimal distortion, and good cable structural return loss with reduced attenuation. FFR 430 offers cable designers opportunities for reducing cable size with cable weight savings or the use of larger conductors to construct low-loss cables without the need for increased dielectric dimensions. This resin is supplied as white pellets, and is used in a nitrogen gas-injected foam extrusion process to produce uniform foam cells in the insulation. Achievable cell size and void content will vary based on wall thickness and processing conditions.&&

Product Description
Supplier	Chemours
Generic	含氟聚合物
Material Status	Commercial: Active
Features	Low liquidity,Nucleation
Availabilitys	North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.14	g/cm³	ASTM D792 , ISO 1183
Melt Flow Rate
372℃，5.0kg	7.0	g/10min	ASTM D2116 , ISO 12086

THERMAL	Nominal value	Unit	Test method
Melting temperature	260	℃	ASTM D4591

Electrical performance	Nominal value	Test method
Dielectric constant		IEC 60250
1 kHz	2.04	ASTM D150
1 MHz	2.04	ASTM D150
1.00 GHz	2.04	ASTM D2520
Dissipation factor		IEC 60250
1 kHz	1.0E-4	ASTM D150
1 MHz	6.0E-4	ASTM D150
1 GHz	9.0E-4	ASTM D2520

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.