| About |
|---|
| Vinnolit E 68 CF is a fine-particle, paste-making emulsion homopolymer that is readily converted into low-viscosity plastisols with a good shelf life. Vinnolit E 68 CF pastes with medium plasticizer content show nearly newtonian flow over the entire shear range. Vinnolit E 68 CF exhibits outstanding foaming characteristics that are remarkably kicker-independent across a wide range of plasticizer levels to produce semi-rigid as well as flexible products. Apart from compact coatings, its major application is to produce chemically blown foams having a particularly fine cell structure.&& |
| Product Description | |
|---|---|
| Generic | PVC homopolymer |
| Material Status | Commercial: Active |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.35 | g/cm³ | ISO 60 |
| K-Value | 68.0 | ISO 1628-2 | |
| Viscosity value | |||
| Reduced viscosity | 116.0 | ml/g | ISO 1628 |
| Emulsifier Content | Medium | ||
| Volatiles | < 0.50 | % | ISO 1269 |
| Particle size distribution | < 3.0 | % | ISO 4610 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. retained on 0.063 mm screen |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |